|
|
Technical Information
Plinth Heaters
In most homes, the kitchen is the most restricted room when it comes to installing heating.
Standard heating appliances/radiators take up precious wall space, limiting kitchen design possibilities.
Our space saving plinth heater allows the use of the ‘dead space’ within the kitchen unit plinths,
freeing up wall space for kitchen units, appliances etc.
Our plinth heaters are designed to be installed and operate, as part of the central heating system,
in the same way as a standard panel radiator. Flexible installation hoses and isolating valves are
included with the heater. The heater is designed for use on standard 15mm two-pipe systems.
Operation is simple with the heat being blown through a heat exchanger by a low-noise 2-speed fan,
heating the room up quickly and efficiently. The heater, when left in the ‘on’ position, will automatically
switch on and off with the central heating system. Heat output is 1166 Watts / 3979 Btu.
Three front grille covers are included within the pack - white, brown and stainless steel.
(Almost all of our competitors’ plinth heaters come with a standard white grille with the
brown or stainless steel grilles available as an expensive option!)
2 Year warranty.
Valves
A range of quality valves. Solid brass construction with a 5 year warranty.
Chrome Towel Rails
Material: Mild Tubular Steel
Vertical Tubes: 30mm x 40mm x 1.5mm ‘D’ profile
Cross Rails: 22mm Ø x 1.00mm
No. of Cross Rails: 16 rails on 800mm high / 24 rails on 1200mm high
Manufacturing: ‘Silver Brazed’ welding, which gives a much superior finish to the
more commonly used ‘Brass Bazed’ method. Each Towel Rail is pressure tested to 13 bar.
Chrome Plate: Each Towel Rail has a minimum pre-coat of 35 microns of copper and
15 microns of nickel before the final chrome plating process.
Brackets: 4 x adjustable chrome brackets as standard. Wall to front of rail projection,
between 80mm and 105mm.
Packaging: Towel Rails are fitted with hard plastic corner protectors, the rail is then shrink
wrapped before being packaged in a strong, fully enclosed box, then shrink wrapped again.
Warranty: Five years warranty on the Towel Rail.
Chrome Electric Towel Rails
Material: Mild Tubular Steel
Vertical Tubes: 30mm x 40mm x 1.5mm ‘D’ profile
Cross Rails: 22mm Ø x 1.00mm
No. of Cross Rails: 16 rails on 800mm high / 24 rails on 1200mm high
Manufacturing: ‘Silver Brazed’ welding, which gives a much superior finish to the more commonly
used ‘Brass Bazed’ method. Each Towel Rail is pressure tested to 13 bar.
Chrome Plate: Each Towel Rail has a minimum pre-coat of 35 microns of copper and 15 microns of nickel
before the final chrome plating process.
Brackets: 4 x adjustable chrome brackets as standard. Wall to front of rail projection, between 80mm and 105mm.
Element: German manufactured with a class leading IP67 rating.
Packaging: Towel Rails are fitted with hard plastic corner protectors, the rail is then shrink wrapped before
being packaged in a strong, fully enclosed box, then shrink wrapped again.
Warranty:Five years warranty on the Towel Rail. Two years warranty on the
electric element.
Stainless Steel Range Electric
Quality stainless steel
Safe and energy efficient
Dry element technology
Environmentally friendly
Most models use less power than a light bulb
Stainless steel does not rust
Very lightweight, no liquid
No liquid leakage
No welding or assembly marks
Low wattage spiral element providing economical heat
IP34 rating, ideal for bathrooms & en suites
Easy to install, no plumbing required
Warranty - 2 years
|
